Publicité
EN
STEAMOUT
The "Steamout" function allows to empty the ma-
chine hydraulic circuit in the event of long non-use
periods or
transport.
Follow the instructions to empty the hydraulic
The display will show the following
Remove the water
Press the MULTIFUNCTION button
The machine will start the steam-out
During the steam-out cycle, the display will show
the following
animation.
Once the hydraulic circuit steam-out cycle is over,
the machine will turn
54
MACHINE SETUP
animation.
tank.
to
cycle.
off.
SETTINGS
➤
Select the "Settings" option, then press the MUL-
TIFUNCTION button
the machine settings.
circuit.
➤
➤
➤
➤
➤
Unit information
The "Unit information" parameter displays the
manufacturing data of the machine:
•
•
•
•
confirm.
Auto switch off
The "Automatic switch-off" function allows to
set the idle time of the machine for entering the
stand-by mode.
Machine factory-setting is 30 minutes.
ECO mode
The "ECO mode" function allows to set the idle
time of the machine for entering the stand-by
mode.
Machine factory-setting is 10 minutes.
to display and change
Unit information
Auto switch off
ECO mode
Back
Exit
Software Version
Software production date
Development environment version number
Machine serial number
Publicité
