Publicité
To open the MACHINE MENU, press and keep
pressed the MULTIFUNCTION button
5 seconds at least.
In the machine menu you can change the param-
eters of the following functions:
Recipes
➤
Care
➤
Settings
➤
Service
➤
Credit
➤
Technical menu
➤
Power off
➤
Exit
➤
Parameters that can be changed depend on the
settings carried out on the machine.
Use the scroll arrows
the machine menu. Press the MULTIFUNCTION
button
to enable the selected function.
RECIPES
➤
Select the "Recipes" option, then press the MUL-
TIFUNCTION button
all data relevant to beverage supply.
Espresso temperature
➤
Product vol. in ml
➤
Back
➤
Exit
➤
ESPRESSO TEMPERATURE
The "Espresso Temperature" parameter allows to
set three temperature levels for the Espresso:
•
Low
•
Medium
•
High
The factory-set temperature of the machine is
"High".
MACHINE SETUP
for
-
to navigate through
to display and change
PRODUCT VOLUME IN ML
The "Product volume in ml" parameter allows to
adjust the dosage amount of each beverage.
•
ESPRESSO
•
LONG ESPRESSO
•
LONG COFFEE
•
FREE DOSE
Select the required beverage and adjust the dosage:
(MIN 0.70 fl oz (20 ml) up to MAX 8.45 fl oz (240 ml).
BACK
The "Back" function allows to go back to the main
menu.
EXIT
The "Exit" function allows to close the machine
menu and go back to beverage selection.
CARE
➤
Select the "Maintenance" option, then press the
MULTIFUNCTION button
able all the cleaning and maintenance processes.
Descaling
➤
Cleaning
➤
Filter
➤
Steamout
➤
Back
➤
Exit
➤
DESCALING
The "Descaling" function consists of a further
submenu allowing to display descaling statistics
and to start the descaling cycle.
Statistics
➤
Start descaling
➤
Back
➤
Exit
➤
Statistics
The "Statistics" parameter displays the descaling
level percentage diagram.
EN
to display and en-
47
Publicité
