Maintenance And Repair; Recycling And Disposal; Accessories - Siemens Simatic Net Ruggedcom Rst2000 Serie Notice De Service

4.1

Maintenance and repair

The product(s) described in these Original Instructions is maintenance-free. Repairs to the product(s) may only be carried out
by the manufacturer.
CAUTION
Burn hazard — risk of serious personal injury
Risk of burns during maintenance work on parts with a surface temperature above 70 °C (158 °F).
• Take appropriate protective measures, for example, wear protective gloves.
• Once maintenance work is complete, restore the touch protection measures.
4.2

Recycling and disposal

The product(s) described in these Original Instructions is low in pollutants, can be recycled, and meets the requirements of
the WEEE directive 2012/19/EU for the disposal of electrical and electronic equipment.
Do not dispose of electronics at public disposal sites.
For environmentally friendly recycling and the disposal of electronics, contact a certified disposal company for electronic
scrap or your Siemens representative.
For more information, refer to https://support.industry.siemens.com/cs/ww/en/view/109479891
(https://support.industry.siemens.com/cs/ww/en/view/109479891).
Note the different national regulations.
4.3

Accessories

You can find information about approved accessories in the documentation.
5 Approvals
The product(s) described in these Original Instructions have the approvals listed below.
Note
Issued approvals on the type plate of the device
Markings for the approvals listed are printed on the product label.
5.1 European Union (EU)
The products meet the requirements of the following standards:
• EN 62368-1
6 Cybersecurity information
Siemens provides products and solutions with industrial cybersecurity functions that support the secure operation of plants,
systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and
continuously maintain – a holistic, state-of-the-art industrial cybersecurity concept. Siemens' products and solutions
constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such
systems, machines and components should only be connected to an enterprise network or the internet if and to the extent
such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation)
are in place.
42
RUGGEDCOM RST2000 series Industrial Ethernet switches
C79000-G8999-1656-01