Publicité
ENGLISH
Section 6. Maintenance
WARNING
To avoid electric shock and other hazards which could result
in permanent injury or death, disconnect (unplug) the cleaner
from the power source before performing any cleaning and
maintenance.
Figure 16. Charging Distance to Pool Edge
6.1
Clean the Cleaner
1. Rinse the cleaner thoroughly with clean water.
2. Always dry the cleaner with a towel before charging.
DO NOT leave the cleaner to dry in the direct sun.
6.2
Clean the Filter Canister
The filter canister should be cleaned at the end of each
cycle before debris dries.
1. Push the cover lock and lift the cover until it is secured
in the vertical position.
Figure 17. Lift Cleaner Cover
2. Remove the filter canister assembly from the body.
3. Empty all debris from the filter canister, then rinse the
filters and the cleaner using a hose.
Page 12
11.5 ft
(3.5 m)
Polaris
FREEDOM
SC Cordless Robotic Cleaner | Owner's Manual
®
™
Figure 18. Remove and Wash the Filter Canister
NOTE: Periodically, remove the filter canister and clean thoroughly with
soapy water and a soft bristle brush.
4. Replace the filter canister into the cleaner.
5. Store the cleaner and the out of direct sunlight.
Figure 19. Store Cleaner
NOTE: We recommend to let the cleaner dry before charging.
Publicité
