Publicité
Polaris
FREEDOM
SC Cordless Robotic Cleaner | Owner's Manual
®
™
WARNING
Do not enter pool while the robotic cleaner is in water.
4.3
Configure the System
1. On the My Systems page, click + in the upper right-
hand corner to add a system.
2. Choose "Robotic Cleaner" from the list and choose
your model type.
3. Follow on screen prompts to pair your cleaner.
4. Slide the slider right and HOLD for ten seconds to put
the cleaner in Pairing Mode.
Wi-Fi LED Indicates Connection Status
BLINKING - pairing
SOLID - connected to internet
Figure 15. Slide and Hold Right to Pair
5. Follow on-screen prompts to add your cleaner and
connect to your home router.
NOTE: If you have problems connecting, the Wi-Fi signal may
not be strong enough next to the pool. Try placing the
cleaner in another location closer to your home router
(see iAquaLink Troubleshooting section .)
Section 5. iAquaLink
IMPORTANT
WiFi signals cannot travel underwater. Most app functions
are therefore not available during a cleaning cycle. Place the
cleaner back on the charging stand to reconnect to the WiFi.
WARNING
Do not enter pool while the robotic cleaner is in water.
Control
®
5.1
iAquaLink Control Home Screen
App function and design is subject to change.
Start Cleaning
Clean Mode
Battery Charge Status
Green Charged: Fully charged
Green Charging: Ready for use
Orange Charging
Orange Partially Charged
5.2
Set Cleaning Mode
Start Cleaning
1. From the main screen, select Cleaning Mode to view
options.
2. Select Cleaning Mode. The factory default cleaning
mode is Floor/Wall.
3. From the Home screen, press the Start button
to begin cycle. The cleaner will start when it detects
water and will cancel the cycle if not submerged after
5 minutes.
Cleaning Mode
Select
Floor/Wall
Product or App
Floor
Product or App
5.3
In-App Error Messages and
Troubleshooting
After removal and when connected to WiFi, the app will
display any errors from the previous cleaning cycle.
1. Click on the warning symbol to view troubleshooting
advice on how to fix the issue.
2. Choose Clear Error if you believe you have fixed the
problem and want to re-try. Choose OK if you want to
suspend the cleaner in error mode and work on the
troubleshooting fix at a later time.
5.4
System Settings
Access System Settings by pressing the gear icon in the
upper right hand corner of the app screen.
ENGLISH
Runtime
2 hrs
1.5 hrs
Page 11
Publicité
