Publicité
ENGLISH
3.6.2 Hook Retrieval
1. When cleaner is on the floor, attach the hook to a
standard pool cleaning pole (not included).
Figure 11. Removal Hook
2. Secure the hook on the cleaner handle. Bring the
cleaner to the waterline.
Figure 12. Secure the Hook
3. Pull up the cleaner by the handle and hold vertically to
let the water drain into the pool.
Figure 13. Drain the Cleaner
4. Charge the cleaner out of direct sunlight.
Page 10
Polaris
FREEDOM
SC Cordless Robotic Cleaner | Owner's Manual
®
™
Figure 14. Store the Cleaner
NOTE: For best results, dry the cleaner before charging. See
maintenance section.
Section 4. Installing iAquaLink
The iAquaLink app is available for download from the App
Store or Google Play.
Before you begin installation, make sure you have the
following:
• Robotic cleaner is connected and plugged into a
GFCI outlet
• Smart device (phone) with Wi-Fi and Bluetooth
enabled
• Wi-Fi router with sufficient signal strength
IMPORTANT
Have your Wi-Fi network password available
4.1
Download the App
Install or update the iAquaLink app from the App Store or
Google Play.
Once the download is complete, select the iAquaLink
icon on your smart device to open the app.
4.2
Sign Up and Log In
Click Sign Up to create a new user account. Or, if you
previously set up an iAquaLink account, click Log In to
access your systems.
Complete all required fields in the Account Setup page
and agree to the Terms and Conditions.
®
®
Publicité
