Publicité
VARIATION WITHOUT LIGHT KIT
There is a round fixing plate on the bottom of the motor rotor, unscrew the 3
screws from this plate.
Insert the cable inside the hole in the rotor.
Then hold the plate and fix it using the three screws. Do not completely tighten
your screws, turn the plate so that the holes are at the smallest hole diameter,
and tighten the screws.
Now, take the cover carefully, and turn it in the holder clockwise so that it is
screwed into the holder.
Fixing Plate
Decorative cover
(without light)
35
Screws
Cable
Fixing
Plate
Screws
Publicité
