Publicité
BLADES
ATTENTION! Do not power the fan without mounting the blades
first. The engine is equipped with a safety mode that will prevent
it from operating normally
There are 2 types of blades:
Open blades: with a round notch and
can be installed with or without the
light kit.
Using a screwdriver, remove the
rubber shims between the case
and the engine.
CLOSED BLADES
Attach the blade to the motor, and tighten the
two screws firmly.
Repeat to install all the 3 blades and tighten
all the screws firmly.
.
- without light kit
Closed blades: with triangular shape
and cannot be installed with the light
kit.
Motor housing
Screws
31
Screws
Rubber
pad
Blades
Motor housing
Publicité
