Publicité
2. Layout and items supplied
2.1 Layout (Fig. 1-20)
1. Filter cleaning button
2. Filters
3. Filter cover
4. Automatic socket-outlet for electric tools
5. Head
6. Recessed handle
7. ON/OFF/Automatic switch
8. Suction hose connection
9. Flexible suction hose
10. Container
11. Water drain screw
12. Rollers
13. Wheels
14. Combination nozzle
15. Accessory compartment
16. Rotary knob for suction power adjustment
17. Suction tube, telescopic
18. Carry-handle
19. Blow connector
20. Filter cage
21. Safety fl oat valve
22. Electric tool adapter
23. Crevice nozzle
24. Pleated fi lter with cover
25. Foam fi lter
26. Upholstery nozzle
27. Collection bag
28. Handle
29. Air regulator
30. 4 x Washers for fi tting the wheels
31. 2 x Split pins for fi tting the wheels
32. 2 x Covers for fi tting the wheels
33. Axle for fi tting the wheels
34. Hook for cable store
35. Suction tube holder
36. Screw for fi tting the carry-handle
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
Anl_TE_VC_2580_SACL_SPK13.indb 17
Anl_TE_VC_2580_SACL_SPK13.indb 17
GB
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Flexible suction hose
•
Electric tool adapter
•
Dirt bag
•
Foam filter
•
Upholstery nozzle
•
Crevice nozzle
•
Combination nozzle
•
Handle
•
Pleated filter with cover
•
Suction tube, telescopic
•
Covers for fitting the wheels (2x)
•
Axle for fitting the wheels
•
4 x Washers for fitting the wheels
•
2 x Split pins for fitting the wheels
•
2 x Wheels
•
2 x Castors
•
Coarse filter
•
Push bar
•
2 x screws for push bar assembly
•
2 x fastening screws for push bar assembly
•
Two screws for fitting the carry-handle
•
Carry-handle
•
Original operating instructions
3. Proper use
The wet and dry vacuum cleaner is designed for
wet and dry vacuuming using the appropriate
fi lter. The equipment is not suitable for the vacu-
uming of combustible or explosive substances.
Wet and dry vacuum cleaners to dust class L
are only allowed to be used for dry vacuuming of
harmful dusts with an exposure limit value greater
than 1 mg/m³ (dust class L) using the appropriate
pleated fi lter.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
- 17 -
21.01.2025 13:33:21
21.01.2025 13:33:21
Publicité
