Me BELL-510 RX Mode D'emploi page 203

ENGLISH
BELL-219 TX
and this will affect the functionality of this unit.
After each battery change, the transmission code changes and the radio trans-
mitter must be taught-in again on the receiver.
OTHER CONNECTION OPTIONS
The sound-active radio transmitter is compatible with the following products:
• Bell system
• FG-1 (FR-60/3)
• FG-2
• FG-3 (FR-90)
• FG-4 (FR 70)
• FG-5
• FG-6
• FG-7
• FG-8
• Basic-Line
• DGF-100
GB
TECHNICAL DATA
• Frequency: 434 MHz; <10 mW
• Power supply: 2 x 1.5 Volt Mignon (AA) batteries
• Consumption: < 0.03mA standby (approx. 15mA in transmit mode)
• Dimensions: 90mm x 90mm x 26mm (transmitter)
32mm x 22mm x 12mm (sensor)
NOTE
Exposure to strong static, electric or radio frequency fields (discharges, mobile
phones, radio equipment, mobile phones, microwaves) may cause the equip-
ment (the unit) to malfunction.
21