Publicité
8. After tightening Lap Belt, secure the
free end of the lap belt under the
LockStrong.
9. Apply pressure to fully close the
LockStrong. The lock indicator will
turn GREEN when fully closed.
NOTE: If belt tensioner does not fully
close (lock indicator still RED), open
the LockStrong and try loosening the
lap belt slightly.
NEVER place any part of vehicle
belt over LockStrong, even in a
vehicle with longer Buckle Stalks.
This will prevent proper operation of
the Car Seat.
68
Lap Belt Only (Rear-Facing and Forward-Facing)
Installing Lap Belt
Publicité
