Publicité
Configure the stop and restart discharging capacity
and minimum SOC
Default: 10%, 80%, 10%
Configure the maximum charging current and
limitation while charging from Utility
Default: 50A, 30A
Configure the limitation of discharging current
Default: Disabled (means no limited)
**Parallel application will disable the discharging limitation
Configure the compatibility of AC input source
Default: Utility
Configure fault or overload behaviors
Default: Disabled, Disabled
Specific critical operations
(Password 4743 is necessary)
-
Reset to factory setting
-
Erase all logs
-
Export all logs
-
Firmware upgrade
74
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com - Hot Line/Tel + 33 (0)2
40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 10 24 AA 59 203 04
Invalid password, try again
Publicité
