Cata IAS 6024 Manuel D'instructions page 60

EN
Error messages shown on the display
CODE
Er03
E1
E2
E5
E7, E9, E10
E8
Problems that prevent the use of the hob
CODE
F1, F3, F4
E4, E6
If you cannot find a solution...
Contact the After-Sales Service, stating the error code shown on screen and describing the situation.
Warning: For your safety and that of the appliance, **do not attempt to dismantle or repair the product yourself.
60
MEANING / CAUSE
Liquid or object on the control
area.
Glass overheating.
Internal overheating.
Communication error
between zones.
Communication error with
the fan.
Fan blocked.
MEANING / CAUSE
Fallo grave de comunicación
interna.
Electrical supply failure.
SOLUTION
Clean the control area and remove any object.
Do not cook with empty pans. Wait 30
minutes. If the issue persists, contact the After-
Sales Service.
Ensure the ventilation grille is clear (see FIG.8).
Wait for the fan to stop before reuse. If it persists,
contact the After-Sales Service.
Disconnect the power for 1 minute and reconnect. If
it continues, contact the After-Sales Service. Other
zones may still be used.
Disconnect the power for 1 minute. If it persists,
contact the After-Sales Service. Cooking is
possible without extraction.
* E10 may appear momentarily due to internal
processor overload, but it is not considered a fault
unless it remains displayed.
Disconnect the power and check for obstructions. If
it persists, contact the After-Sales Service. Cooking
zones remain operational. Cooking is possible
without extraction.
SOLUTION
Disconnect the power for 1 minute. If the error
continues, do not use the appliance and contact
the After-Sales Service.
Check the connection (see FIG.1) and voltage. If
the issue persists, do not use the appliance and
contact the After-Sales Service.
USE