Cata IAS 6024 Manuel D'instructions page 57

EN
Countdown Alarm
A countdown timer with acoustic alert can be set independently from the cooking zones or fan.
To activate:
1. Ensure no elements are active and press the Timer / Delayed Switch-Off Button (D) "
2. Set the desired time using the Power/Time Increase (I) "
time by 30 seconds. Pressing both buttons simultaneously cancels the countdown.
3. Confirm the time by pressing (D) "
4. When time has elapsed, the hob emits an alert and "00" flashes on the Timer Display (d-T) for 10 minutes. Press
any button to stop the signal.
While the countdown is active, the Timer Display (d-T) always shows its remaining time. If another element is also
timed, select it to view its value.
Pause Function
This function temporarily suspends all active cooking zones while saving their settings, which can be resumed
within 10 minutes.
To activate Pause:
Press the Cooking Functions / Pause Button (F) "
indicating Pause Recovery. If the extractor fan was running, it will remain active.
To resume:
Press the Cooking Functions / Pause Button (F) "
(C) " ". The "ıı" symbol remains on screen for 5 seconds during recovery.
Control Lock
This locks all active functions and disables the rest of the controls, allowing the glass surface to be cleaned without
altering settings.
To activate:
While the hob is operating, short press the Child Lock / Safety Lock Button (C) "
show "LL".
To deactivate:
Press and hold the same button (C) "
In the event of a power cut, the hob will restart switched off and unlocked when power is restored.
Safety Lock
Prevents accidental or unauthorised use of the hob (e.g. by children).
To activate:
With the hob on standby and no elements running, press and hold the Child Lock / Safety Lock Button (C) "
3 seconds. The Timer Display (d-T) will show "LO" and the hob will switch off after 30 seconds.
To deactivate:
Switch on the hob and press and hold the same button (C) "
with all functions enabled.
If a power cut occurs while the hob is locked, it will remain locked once power is restored.
Grease Filter Cleaning Alert
After 50 hours of extractor fan use, the Timer Display (d-T) will show "IF", indicating that the grease filters must be
cleaned.
Once cleaned, reset the alert by pressing the Power/Time Increase Button (I) "
Pause Button (F) " " simultaneously.
" or Decrease (H) "
" again or wait 5 seconds.
". All active cooking zones will pause. The display shows "ıı"
", then confirm by pressing the Child Lock / Safety Lock Button
" for 3 seconds, or turn off the hob after cooking is complete.
" for 3 seconds. The hob will return to standby mode
".
" buttons. Each press changes
". The Timer Display (d-T) will
" and the Cooking Functions /
USE
" for
57