Hob Section; Introduction Of The Oven Control Panel; Oven Operating Functions - Beko Fbs63121Wd Manuel D'utilisation

Table des Matières

3.1.2 Hob section

1
2
3
1 Active hob warning lamp
3 Function selection knob
5 Hob control knobs
If there are knob(s) controlling your
product, in some models this/these knob(s)
may be so that they come out when pushed
(buried knobs). For settings to be made
with these knobs, first push the relevant
knob in and pull out the knob. After making
your adjustment, push it in again and re-
place the knob.
Function selection knob
You can select the oven operating func-
tions with the function selection knob. Turn
left / right from closed (top) position to se-
lect.
Temperature knob
You can select the temperature you want to
cook with the temperature knob. Turn
clockwise from the closed (top) position to
select.
Oven inner temperature indicator
You can understand the oven interior tem-
perature from the temperature lamp. The
thermostat lamp is located on the control
1
2
3
4
3.2 Introduction of the oven control
4
panel. The thermostat lamp turns on when
the product starts to operate, and the ther-
mostat lamp turns off when it reaches the
set temperature. When the temperature in-
side the oven drops below the set temper-
ature, the thermostat lamp turns on again.
Hob control knobs
You can operate your hob with the hob con-
trol knobs. Each knob operates the respect-
ive burner/hotplate. You may infer which
burner/hotplate it controls from the sym-
bols on the control panel.

3.3 Oven operating functions

On the function table, the operating func-
tions you can use in your oven and the
highest and lowest temperatures that can
be set for these functions are shown. The
order of the operating modes shown here
may differ from the arrangement on your
product.
EN / 15
Rear left - Hotplate
Front left - Rapid burner
Front right - Auxiliary burner
Rear right - Normal burner
panel
5
2 Thermostat lamp
4 Temperature knob
EN
FR

Chapitres

Table des Matières
loading

Table des Matières