Publicité
Power on Robot
4
1. Turn on the power switch and place the robot in front of the station that is
connected to power supply.
Connect robot with APP
5
Name
The infrared interface is turned off by default,
and it is activated when the robot is in the
Charging
station.Provides power to the station, and
Interface
the main unit can connect with the charging
contacts on the station for charging.
Facilitates data transfer between the app
WI-FI*
and the robot, enabling control of the robot
through the App.
ECOVACS products offer smart functions such
as network setup, mapping, and cleaning
ECOVACS HOME
mode selection (specific to each product). To
App
utilize these features, users need to download
and use the official ECOVACS Home App.
The robot series robotic vacuums are designed for domestic cleaning
•
scenarios. A home Wi-Fi network is required for operation, and anti-DDoS
protection can be configured by users through route settings.
EN
16
Description
Wi-Fi Network Requirements:
• You are using a 2.4 GHz or 2.4/5 GHz mixed network.
• Your router supports 802.11b/g/n and IPv4 protocol.
• Do not use a VPN (Virtual Private Network) or Proxy Server.
• Do not use a hidden network.
• WPA and WPA2 use TKIP, PSK, and AES/CCMP encryption.
• WEP EAP (Enterprise Authentication Protocol) is not supported.
• Use Wi-Fi channels 1-11 in North America and 1-13 outside North
America (refer to local regulatory agency).
• If you use a network extender/repeater, the network name (SSID) and
password are the same as your primary network.
• Please enable WPA2 on your router.
Wi-Fi Indicator Light
Slow flashing white light
Fast flashing white light
Steady white light
Please be aware that intelligent features such as remote startup, voice
interaction, 2D/3D map display and control settings, and personalized
cleaning (depending on the Appliance) require the ECOVACS HOME
App, which is constantly updated. You need to agree to our Privacy
Policy and User Agreement so that we can process some of your
essential and necessary information before you can use certain features
of the ECOVACS HOME App to control the Appliance. If you disagree
with our Privacy Policy and User Agreement, such features will be un-
available. However, you can still use the basic features of this Appliance
for manual operation.
Disconnected from Wi-Fi
Connecting
Connected to Wi-Fi
Publicité
