Publicité
5. To lift away the stain, apply
downward pressure on the
front of the cleaning tool and
pull the tool backward slowly
to vacuum up excess dirty
liquids. Repeat as necessary.
6. Empty the dirty water tank
when the dirty liquid reaches
the "Max Fill" line and there is a
loss in suction. See instructions
in the EMPTYING THE DIRTY
WATER TANK (page 16-17).
7. Once you have completed
cleaning, press the power
button; and disconnect the
battery pack from the spot
cleaner.
WARNING
Personal Injury and Product
Damage Hazard
When any abnormality/failure
occurs, stop using the product
immediately and remove the
battery pack.
USING THE SPOT CLEANER
BATTERY STATUS INDICATOR
The battery status indicator will
light up to indicate the battery
power.
When the battery power is
between 67%~100%, the 3 LEDS
will glow a steady light. When
the battery power is between
34%~66%, the 2 LEDS will glow
a steady light. When the battery
power is between 5%~33%, only
1 LED will glow a steady light.
When the battery power is less
than 5%, the 1 LED will flash
until the battery power fully
discharged.
Battery Status
Indicator
3 LEDS, Continuous
2 LEDS, Continuous
1 LED, Continuous
1 LED, Flashing
- 15 -
Battery Status
Indicator
Battery Capacity
67%~100%
34%~66%
5%~33%
(Recharge
recommended)
0~5%
(Recharge
required)
Publicité
