Publicité
Please pay special attention to these hazard alert boxes,
and follow any instructions given. WARNING statements
alert you to such hazards as fire, electric shock, burns and
personal injury. CAUTION statements alert you to such
hazards as personal injury and/or property damage.
Before assembling the spot cleaner, check the PACKING LIST (page
2). Use this list to verify that you have received all the components of
your new Kenmore Spot Cleaner.
1. Attach the hose storage clip
to the spot cleaner as shown
and secure it with the provided
screw.
NOTE:
Tighten the screw with
a Phillips head screwdriver.
Ensure that the screw is secured.
2. Attach the tool storage clip to
the spot cleaner as shown and
secure it with the provided
screw.
ASSEMBLY INSTRUCTIONS
Screw
Screw
3. Slide the tough stain tool onto
the end of the suction hose
until it clicks into place.
To remove: Press the tool release
button and pull away the tough
stain tool.
NOTE:
Put the flexible hose
onto the hose storage clip. Snap
the end of the hose with the tool
installed into the tool storage clip
when not in use.
- 10 -
Publicité
