Publicité
FILLING THE CLEAN WATER TANK
6
/0.4G
/0.3G
/0.2G
CAUTION
Do not fill with water above
104°F (40°C).
Do not exceed filling the clean
water tank over the maximum fill
line indicated on the clean water
tank.
NOTE:
An 8 oz. (236ml) bottle
of cleaning formula is provided
with this spot cleaner. Ensure
the cleaning formula and water
are mixed correctly. Water must
be at room temperature. Once
the sample is depleted we
recommend only using Kenmore
cleaning solution KS1010
(available at kenmorefloorcare.
com). Using other solutions
may cause excess foaming and
invalidate your warranty.
NOTE:
Using more than
the recommended amount of
cleaning formula may cause
excessive foaming. KEEP OUT
OF REACH OF CHILDREN. In
case of eye contact, thoroughly
flush with cold water. If irritation
persists, consult a physician.
4. Insert the locking tabs into the
slots of the clean water tank
first and then secure the clean
water tank cover back into
place until a click is heard.
5. Slide the clean water tank back
onto the unit. The security
latch will automatically secure
once the clean water tank is in
position. A click will be heard
when correctly installed.
- 13 -
Publicité
