Publicité
3. The battery pack will begin to
charge. The battery indicator
LEDs on the battery pack will
flash continuously.
4. When the battery is fully
charged, all three indicator
LEDs light up continuously, and
will turn off after 10 minutes.
FILLING THE CLEAN WATER TANK
1. Lift up the clean water tank
from the side of the unit. A
security latch is positioned to
keep the clean water tank in
position to avoid unintentional
release. The latch will
automatically release when the
tank is pulled upwards.
2. Remove the clean water tank
cover by undoing the clean
water tank cover release.
CHARGING
OPERATING INSTRUCTIONS
Security
Latch
5. Once charging is completed,
remove the battery from
the charger and unplug the
charger from the outlet.
3. Fill the tank with clean water
and cleaning formula. Ensure
the correct proportion of water
and cleaning solution is used
by referring to the solution
label.
SMALL CLEANING AREA -
0.8L/0.2G Liquid
LARGE CLEANING AREA –
1.6L/0.4G Liquid
- 12 -
Publicité
