Positioning The Seat - Toro Titan Max 60In Mode D'emploi

Safety-Interlock System (continued)
3. Sit on the seat, move the blade-control switch to the O
control levers to the P
the blade-control switch, and rise slightly from the seat; the engine should shut off within
1 second.
4. Sit on the seat, move the blade-control switch to the O
control levers to the P
the motion-control levers to the center, unlocked position and rise slightly from the seat;
the engine should shut off within 1 second.

Positioning the Seat

Operation: Before Operation
G511505
position. Start the engine. While the engine is running, engage
ARK
G511506
position. Start the engine. While the engine is running, move
ARK
G511507
G451798
Page 4–7
position, and move the motion-
FF
position, and move the motion-
FF
3474-300 A