Using The Rollover-Protection System (Rops) - Toro Titan Max 60In Mode D'emploi

Using the Rollover-Protection System (ROPS)

To avoid injury or death from rollover: keep the roll bar in the fully raised, locked
position and use the seat belt.
Ensure that the seat is secured to the machine.
There is no rollover protection when the roll bar is in the down position.
• Lower the roll bar only when absolutely necessary.
• Do not wear the seat belt when the roll bar is in the down position.
• Drive slowly and carefully.
• Raise the roll bar as soon as clearance permits.
• Check carefully for overhead clearances (i.e., branches, doorways, electrical
wires) before driving under any objects, and do not contact them.
Lowering the Roll Bar
1. Remove the hairpin cotters and pin from both sides of the roll bar.
2. Lower the roll bar.
3. Install the 2 pins and secure them with the hairpin cotters.
3474-300A
WARNING
WARNING
G511772
Page 4–4 Operation: Before Operation