Disposal Of The Device - Pro's Pro Phoenix-2 Manuel D'instructions

Operating instructions
for
pro's pro® PHOENIX-2
Now repeat the process and check whether the 30 pounds are now also displayed on the Tension Calibrator. These steps must be
repeated until the set weight matches the weight displayed on the Tension Calibrator.
Now increase the weight on the scale to 60 pounds and check this again using the Tension Cailbrator and retighten the screw if
necessary.
If both weights have been set correctly, the crank is calibrated.

DISPOSAL OF THE DEVICE

Packaging materials are recyclable. Dispose of this packaging in a suitable collection container for recycling.
Correct disposal of the product:
The product must not be disposed of as normal household waste. Take your disused appliance to a collection point for the recycling of old
electrical and electronic appliances. Electronic, iron and metal scrap is worth money! Ask your local scrap dealer for more information.
Arfaian Export-Import Handels Gesellschaft mbH
Froebelstrasse 24
4020 Linz
Austria
online@arfaian.com
©Arfaian Export-Import Handels Gesellschaft mbH
Please note that due to different production series, parts of this manual may not apply to your product This document has been translated using AI -
errors excepted
.
If the adjustment screw cannot be moved, first loosen the front worm screw (1)
slightly, then adjust (2) as described and finally fix the front screw (3) again
page 11 from
11