11.2 Defining the motor's operating mode
Mode 1 (default)
Mode 2
Mode 3
> 3s
Alarm
activation
The shutter closes
The shutter closes
The shutter remains in
position
❶
Press twice on button B located on the front
panel of the remote control (or button T2 for the
TYXIA 2331 wall-mounted remote control), so that
the LED flashes orange.
❷
Then press the
x2
button for around 3 seconds so that the motor
activates briefly.
The motor activates once : Mode 1
The motor activates twice : Mode 2
The motor activates three times : Mode 3
To switch from one mode to another, repeat
operations❶ and ❷.
Stopping
of the alarm
The shutter remains in
position
The shutter opens
The shutter remains in
position
1
2
EN
The motor
activates briefly.
43