DELTA DORE TYMOOV Solar 5 SO Mode D'emploi page 41

9/ Erasing one or more pairings
9.1 Erasing the pairing of the remote control with the motor
- Remove the front panel of the remote control.
- Press button A (or button T1 for the TYXIA 2331 wall-mounted
remote control). The red LED flashes.
- Press as many times as required to select the motor
1 2
to remove.
- Press the button. The motor activates briefly
- Press button A to exit.
9.2 Resetting the remote control
- Remove the front panel of the remote control.
- Press button A (or button T1 for the TYXIA 2331 wall-mounted remote control) .
The red LED flashes.
- Press buttons
The motor activates briefly
- Press button A (or button T1 for the TYXIA 2331 wall-mounted remote control) to
exit.
All the motors paired with the remote control are removed.
10/ Favourite positions
You can save up to 2 favourite positions :
❶ ❷ Position the shutter at the desired position.
❸ Press + or
1 2 1
The LED on the remote control lights up red, then green if the receiver has
successfully received the information.
The shutter is activated briefly to confirm the pairing.
Release the buttons.
1 2
and at the same time and hold for 3 seconds.
1 2 1 2
+ at the same time for 3 seconds to save the position.
2
1 2 1 2
1
2
.
and
2 2
1 1
> 3s
1
1
1
41
EN