Presentation; Installation; Installation Sequence - Watts Vision Wireless Bt-St03 Rf Guide D'installation Et D'utilisation

1. PRESENTATION

Thank you for choosing Vision
a Wireless communication system for
controlling heating and cooling system.
It allows multi zones management (up to
10) of your electrical and hydraulic heating
system.
Smart thermostat, main characteristics :
• Touch screen
• Interface via internet (WiFi)
• Wall mountable with power supply
85-265VAC (50-60) Hz
• Table mountable with supplied bracket
and USB-C power supply (0-5V)
• RF Communication only with Vision
Wireless devices
• Able to manage up to 10 zones or
rooms and 1 wall receiver for the boiler
or heatpump
• Multiple heating / cooling devices control
• SD Card slot for updating software
• Intuitive menus for devices manage-
ment
Content of the packaging:
• Smart thermostat
• 230V Flush mounted power supply
• wall/table support
• CE conformity declaration
• Quick installation guide
4

2. INSTALLATION

Wireless,
®

2.1 Installation sequence

Please follow the set-up sequence below;
STEP 1
2.2 Install your smart thermostat)
STEP 2
name your rooms (see 3.3 Configure your
house).
STEP 3
thermostat
appropriate rooms (see 3.4 Pair your
devices to the smart thermostat).
STEP 4
®
user settings (see 3. Settings)
STEP 5
your system via smartphone / tablet (see 6.
Set up Wifi control)
STEP 6
work on a time schedule (see 7. Heating /
Cooling Device Management)
Install your smart thermostat (see
Create your house / create and
Pair your devices to the smart
/ allocate
Personalise your smart thermostat
Set up Wifi for remote control of
Program your devices so that they
BT-ST03-RF-IOM-FR-W-EN-08-24
EN
them to the