Watts Vision Wireless BT-ST03 RF Guide D'installation Et D'utilisation page 14

6. SET UP WIFI CONNECTION
FOR MOBIL APP REMOTE
CONTROL
STEP 1 Connect the smart thermostat
to your WiFi network:
• Choose WiFi settings
• Choose Research Networks (searches
for your WiFi)
• Choose your WiFi from the list and
enter your regular WiFi password
• Observe smart thermostat counting
down from 120 to zero
• Make sure that the smart thermostat
is now connected to the WiFi network
with an IP address (WiFi status should
read 1/2)
If after several attempts, connection is
unsuccessful, connect the smart thermo-
stat to WiFi manually.
STEP 2 Download the app to your
device:
• For Smartphone: download Vision +
application from App store or Google
Play.
14
STEP 3 Create an Account
• Enter your details and select language.
• Select "Validate" (email will be sent to
you with link).
• Go to your email and click on the link.
• Go back to your App account and follow
the on screen instructions.
• Request a pairing code to link your
smart thermostat. The pairing code
(valid 24h) is sent to your email inbox.
In the WiFi status menu
thermostat, enter the pairing code (internet
access password).
Your smart thermostat should appear after
a few minutes in the application or the web
page. Click the refresh button if necessary.
WiFi status should read 2/2.
Please note! It may take up to a few hours
to display all rooms and devices in the
application. You can then operate your
smart thermostat from anywhere.
Watts is not responsible for the correct
operation of the connected devices, and
potential damage caused by malfunction
or improper use of the connected devices
and appliances.
BT-ST03-RF-IOM-FR-W-EN-08-24
EN
of the smart