Heating/Cooling Devices Management & Programming - Watts Vision Wireless Bt-St03 Rf Guide D'installation Et D'utilisation

EN
7. HEATING/COOLING DEVICES MANAGEMENT
& PROGRAMMING
1
in the main screen and after
selecting the room
1 Device type choice (heating/cooling,
On/Off). These buttons are only dis-
played if one device type is installed in
the room (colored if active).
2 Current mode, press on this icon
to enter in the menu where you can
change the current operating mode.
3 Ambient temperature or setting tem-
perature (setpoint) or humidity after
one press on 8.
4 Heating/cooling indicator (animated if
demand).
5 Information about the heating/cool-
ing devices installed in the room and
BT-ST03-RF-IOM-FR-W-EN-08-24
3
2 4
10
11
access to thermostat parameters.
6 Only displayed if the screen is locked.
7 Set the current setpoint (deactivated if
the screen is locked).
8 To display either the ambient or setting
temperature or Humidity in 3.
9 Quick access to the desired room.
10 Current room name.
11 Room changing.
5 6
7
8
9
15