Maintenance; Technical Characteristics - Watts Vision Wireless Bt-St03 Rf Guide D'installation Et D'utilisation

EN

9. MAINTENANCE

Cleaning of the smart thermostat
Gently dust the outside of the smart ther-
mostat with a soft, lint-free cloth. If the
smart thermostat needs a more thorough
cleaning:
• Lightly dampen a soft and clean cloth
with water.
• Wring out any excess water from the
cloth.
For additional information, please visit
https://wattswater.eu/catalog/regulation-
and-control/watts-vision-smart-home/

10. TECHNICAL CHARACTERISTICS

It is an electronic control device
Purpose of the control
Construction of control
Type of action
Software class
Control pollution degree
Temperature for ball pressure test
Operating temperature, connected.
Shipping and storage temperature
Electrical Protection
Electrical insulation
Temperature precision
Setting Temperature Range
• Comfort
• Reduced
• Anti-freeze
Power Supply
Rated impulse voltage
Frequency band - ERP - Range
Software version
SD card
WIFI
Dimensions
Weight (smart thermostat + power supply + table support)
BT-ST03-RF-IOM-FR-W-EN-08-24
• Gently wipe the display and sides of the
smart thermostat, making sure no drops
of water accumulate around the product.
Important: Do not spray smart thermostat
directly with water, or use cleaning solu-
tions or polishes, as doing so may damage
the smart thermostat.
Automatic radio control
Electronic independently mounted control
Type 1 only
Class A
2
75°C
-30°C to +40*C
-30°C to +50°C
IP30
Class II
0.1°C (from thermostat)
5°C to 37°C in 0.5°C steps
5°C to 37°C in 0.5°C steps
0,5°C to 10°C
85-265V, 50-60 Hz
2500V
868.3 Mhz +/- 300 KHz – ERP < 25mW
Range <40m internal, <100m open space
User interface: Shown on the main menu
Wifi communication: Shown on the wifi menu
<=16GB (FAT)
802.11b – 2.4GHz
802.11g – 2.4GHz
Width: 120 mm, Height: 79 mm, Depth: 19 mm
0.170kg
V.xx.xx
xx.xx
21