Technical Data - Facom FCF894 Notice Originale

Your impact tool can generate the following fastening torque values:
Low/Precision Control/High
FCF894
CAUTION: Ensure fastener and/or system will withstand the level of torque generated by the tool. Excessive torque may cause
breakage and possible personal injury.
1. Place the accessory on the fastener head. Keep the tool pointed straight at the fastener.
2. Press switch to start operation. Release switch to stop operation. Always check torque with a torque wrench, as the fastening torque is
affected by many factors including the following:
• Voltage: Low voltage, due to a nearly discharged battery, will reduce fastening torque.
• Accessory size: Failure to use the correct accessory size will cause a reduction in fastening torque.
• Bolt size: Larger bolt diameters generally require higher fastening torque. Fastening torque will also vary according to length, grade,
and torque coefficient.
• Bolt: Ensure that all threads are free of rust and other debris to allow proper fastening torque.
• Material: The type of material and surface finish of the material will affect fastening torque.
• Fastening time: Longer fasten ing time results in increased fastening torque. Using a longer fastening time than recommended could
cause the fasteners to be overstressed, stripped or damaged.
Date Code Position (Fig. A)
The date code, which also includes the year of manufacture is printed into the housing.
Example 2017 XX XX
Year of Manufacture
Voltage VDC
Type
Battery Type
No load speed (forward)
Impact rate
Max breakaway Torque N.m
Weight (without battery pack) kg
Noise values and vibration values (triax vector sum) according to EN60745-2-2
L (emission sound pressure level) dB(A)
PA
L (sound power level) dB(A)
WA
K (uncertainty for the given sound level) dB(A)
WA
Tightening of fasteners at the maximum capacity of the tool
Vibration emission value ah = m/s
Uncertainty K = m/s
2
NU-FCF894_0518.indd 28
Ft.-Lbs.
0-150/0-330/0-330

TECHNICAL DATA

2
Nm
Low/Precision Control/High
0-200/0-447/0-447
FCF894
18V
1
Li-Ion
0-900/2000/2000
0-3100
813
1,5
94
105
3
13,5
4,4
28
16/07/2018 16:12:35