SilverCrest SMRP 5200 A1 Mode D'emploi page 37

All manuals and user guides at all-guides.com
10. Trouble-shooting
Should your USB travel charger with integrated powerbank not work
as desired, please go through this checklist first. Perhaps there is only
a minor problem, and you can solve it yourself.
WARNING! Risk of material damage!
Do not attempt to repair the device yourself under any circum-
stances.
Fault
Integrated pow-
erbank is not
charging.
Mobile device
is not being
charged.
The charging
process is
aborted after
approx.
30 seconds.
No function
after short cir-
cuit
Possible causes / Action
• Has the device been connected to the power sup-
ply? Inspect the connection.
• Use a USB power unit (not included in the
items supplied).
• The powerbank battery has gone flat. Charge
the battery.
• Has the device been connected to the power
supply? Inspect the connection.
• The charging current of the connected device
is less than approx. 35 mA. This device can-
not be charged by the integrated powerbank.
1. Disconnect cable connection.
2. Briefly charge the powerbank battery.
Device is ready to be used again.
35
GB