Télécharger Imprimer la page

SilverCrest SMRP 5200 A1 Mode D'emploi page 35

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44
All manuals and user guides at all-guides.com
NOTES:
Please note that the LED display shows only an approximate
value of the actual charging state of the integrated powerbank
of the device.
When the battery capacity is less than approx. 10 %, the last
control LED 2 flashes.
After interrupting the charging process using the button
the charging process can be started again by briefly pressing
the button
If no device is connected, press the button
play the charging state. The LED display goes out after approx.
5 seconds.
8.
Cleaning and storing
NOTE: disconnect all cable connections.
Clean the device with a slightly damp cloth. Solvents, spirits,
thinners etc. must not be used, as they can damage the surface
of the device.
When not using the device, store it in a place where neither
high temperatures nor moisture can affect it.
In order to maintain the device performance, it should be fully
charged regularly (approx. every 2 months).
Charge the device before storing it away for a prolonged
period. Please note that if the device is stored for too long, this
may reduce the battery capacity. Avoid a deep discharge of the
battery.
 3.
 3,
 3 in order to dis-
GB
33

Publicité

loading

Ce manuel est également adapté pour:

334245 1907