Basic Parameters; Status Indicator Guide - Roborock F25 Rt Mode D'emploi

Cleaner Head and Dirty
D3
Water Pathway
1. Power off the vacuum cleaner and place it
in a stable position, then remove the dirty
tank, clean tank, and roller.
2. Clean the roller slot and dirty water
pathway with the provided maintenance
brush.
3. Reinstall the dirty tank, clean tank, and
roller.
Note: Do not rinse the cleaner head directly with water.
Charging Dock
D4
Unplug the charging dock and use a soft, dry
cloth to clean its surface and the charging
contacts.
Note: Do not rinse the charging dock directly with water.

Basic Parameters

Vacuum Cleaner
Model WD5M7B
Rated Voltage/
21.6 V 8.8 A
Current
21.6 V/2500 mAh (TYP)
Battery
Lithium-ion battery
Dock Charger
Model MDS18LRR
Rated Input
120 V~
Voltage
Rated
60 Hz
Frequency
Rated Input
0.52 A
(Charging)
Rated Input
6.3 A
(Drying)
Rated Output 30 V 1 A
Charging 21.6 V/2500 mAh (TYP)
Battery Lithium-ion battery
12 12

Status Indicator Guide

Machine Status Status Indicator
Blue indicator
Charging
gradually brightens
Fully charged /
Blue indicator stays
Operating, battery
level ≥20%
on
Battery level ＜20% Blue indicator flashes
slowly
Switch mode Blue indicator flashes
successfully quickly
The indicator
Battery is flashes red and blue
undervoltage alternately then goes
off
Red indicator stays
Dirty tank is full
on
Red indicator keeps
Other errors
flashing