Publicité
Les langues disponibles
Les langues disponibles
Britax Child Safety, Inc.
c. Tuck the lower seat
pan cover around the
inner and outer sides
of the shell from the
forward-facing belt
paths to the front of
the child seat.
d. Continue replacing
the lower shell cover
around the seat to the
other forward-facing
belt path and tuck the
second plastic tab
into the shell between
the forward and rear-
facing belt paths.
IMPORTANT:
Ensure the shell
cover is secured behind red
markers to allow for proper
function of CLICKTIGHT.
e. Thread the harness
adjuster strap through
the front of the lower
shell cover.
f.
Reattach the two
elastic loops at the
front of the lower
shell.
3. Replace the belly pad
and buckle:
a. Turn the buckle
retainer sideways and
route it through the
belly pad.
b. Route the belly pad
and buckle retainer
through the buckle
slot in the cover.
NOTE: Ensure that the
buckle is through the
correct cover slot for the
buckle position.
38
Table of Contents
2c
2d
2e
2f
3a
3b
ADVOCATE/BOULEVARD CLICKTIGHT User Guide
c. Turn the buckle
retainer sideways,
route it through the
front buckle slot
and into the desired
buckle position in the
child seat.
4. Pull the seat pan cover
around the CLICKTIGHT
bezel and over the front
of the seat.
IMPORTANT:
Ensure the seat
pan cover is tucked behind the
CLICKTIGHT bar.
5. Reattach the two elastic
loops on the underside of
the seat pan cover.
6. Replace the head
restraint cover.
a. Loosen the harness
and raise the head
restraint to the
highest position.
b. Reattach the elastic
straps to the rear of
the head restraint.
NOTE: Your select cover
set may have more than
one elastic strap.
c. Reattach the hook
and loop fasteners
on the head restraint
around the harness.
7. Replace the comfort
pads.
Harness Buckle
IMPORTANT:
If your child eats and drinks while in the child
seat, you will need to check the buckle periodically and rinse
out any accumulated debris (see page 45).
Table of Contents
3c
6b
6c
39
Publicité
