Publicité
Les langues disponibles
Les langues disponibles
Britax Child Safety, Inc.
Lap Belt Installation
1. Remove the tether
from the tether storage
compartment and retainer
tabs and place it up and
over the child seat back.
2. Place upright forward-
facing on the vehicle seat.
NOTE: Ensure that the
base of the child seat is
flat on the vehicle seat
and no more than 7.5 cm
(3 in.) of the base hangs
over the edge of the
vehicle seat (see page
29).
3. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
4. Slide the vehicle belt into
the forward-facing belt
slots.
5. Buckle the seat belt.
NOTE: Ensure the vehicle
belt is not twisted and
buckle the seat belt.
6. Push down into the
middle of the child seating
area with moderate force
(approx. 45 lbs/20.4 kg),
compressing the vehicle
seat while tightening the
vehicle belt.
NOTE: Ensure that the
vehicle belt is locked as
directed by your vehicle
owner's manual.
20
Table of Contents
7. Hold harness straps up
8. Attach the tether to a
7.5 cm
Forward-Facing Installation with Lap Belt
3a
3b
ADVOCATE/BOULEVARD CLICKTIGHT User Guide
and away from seat while
closing the CLICKTIGHT.
NOTE: A click helps
confirm the CLICKTIGHT
is secure.
NOTE: If the
CLICKTIGHT is difficult
to close, repeat step 6
with less tension in the
vehicle belt.
designated anchor (see
vehicle owner's manual)
and remove slack (see
page 33).
9 Logo on the CLICKTIGHT dial has returned to a horizontal
position.
9 All connections are secure and vehicle belt is not twisted.
9 Vehicle belt is locked as directed by your vehicle owner's
manual.
9 Child seat base is be flat on vehicle seat and is parallel to
vehicle seat.
9 Recline indicator ball is within the allowable blue section for
the size of the child and that no more than 7.5 cm (3 in.) of
the base hangs over the edge of the vehicle seat (see page
28).
9 Child seat cannot be moved front to back or side to side
more than 2.5 cm (1 in.) at the belt path. If the child seat
is not secure, repeat installation or use a different seating
location.
9 Excess top tether webbing is contained within your vehicle
and secured.
9 The anti-rebound bar is removed.
Table of Contents
21
Publicité
