Installation - Dometic Raintec Rt200 Instructions De Montage

Vehicle model
VW Craer Gen. 2 (from 2016)

7 Installation

7.1 Required installation material
• Drill bit (⌀ 3 mm)
• Screwdriver or bit with drive TX15
• Flexible sealant (e.g. Sikaflex-252)
7.2 Mounting
NOTE Before mounting, test the lighting of the rain gutter for function.
1. Clean and dry the mounting area.

2. Remove the protective film from the adhesive strip.

NOTE The rain gutter can no longer be moved once the adhesive strip is on the vehicle wall. Ensure
correct alignment of the rain gutter before adhering the rain gutter to the vehicle wall.
3. Guide the connection cable down and out (
Ref. no.
9620018318
Fig.  on page 6, 1).
EN
5