Festo DGEA Série Notice D'utilisation page 37

DGEA−...
Fitting external accessories
Use the grooves for fitting external acces
S
sories.
With size 18, the sliding blocks slide over a
recess into the relevant groove.
With sizes 25 and 40, the sliding blocks
will slide into the groove at any position
when tilted.
Selecting the motors:
Make sure that the DGEA−... is driven only with one of the following types of
S
motors. You will then operate a pair of devices which have been specially
matched to each other.
Servo motors
Stepping motors
Servo motors
Fig. 15
If you are using gears at very low temperatures:
Please note
S Note that gears have an increased idling torque until the operating tempera
ture is reached.
Festo DGEA−... 0501a English
DGEA−... Motor without gears
without brake (...−AA)
with brake (...−AB)
18
25
40
18 MTR−ST−87−48S−AA/AB
25 MTR−ST−87−48S−AA/AB
40
DGEA− −G..−... (with right−angle gear unit)
18 MTR−AC−55−3S−AA/AB
25 MTR−AC−70−3S−AA/AB
40 MTR−AC−100−5S−AA/AB
Fig. 14
Geared motor
without brake (...−GA)
with brake (...−GB)
MTR−AC−55−3S−GA/GB
MTR−AC−70−3S−GA/GB
MTR−AC−100−5S−GA/GB
MTR−ST−87−48S−GA/GB
j 18
37