Festo DGEA Série Notice D'utilisation page 35

DGEA−...
DGEA−... with two heads:
Fasten the DGEA−... preferably on the base
S
of the heads.
Make sure that the cantilever arm is
S
exactly parallel to the support surface.
Deviations from parallelism will reduce
the service life of the roller guide.
Compensate the tolerances between the
two heads, if necessary, by using metal
foils or plates.
Note that stroke length H of the DGEA−...
S
depends on the distance h between the
two heads.
Festo DGEA−... 0501a English
Ó Ó Ó Ó Ó Ó Ó Ó Ó
H
Ó Ó Ó Ó Ó Ó Ó Ó
h
Fig. 12
35