SCENTYS R'PULSE 500 Manuel D'utilisation page 25

D
IFFUSION PARAMETER SETTING PRINCIPLE
NB: In all of the screen browsing functions, the active field on-screen blinks and this is symbolised here by
n
n
n
1 2
n The diffusion calendar parameter setting screen is displayed by default. To move between the parameter pages,
press or when a title field at the top left is active.
NB: The parameter setting for each page is explained in detail on the following pages.
18/28
At the end of the initialisation process, the user can access the parameter
setting menu by pressing the menu button .
The diffuser displays the menu page.
Press to go to "Paramètre" (Parameters), then press
the "Paramètre" (Parameters) menu.
IMPORTANT: When changing from any page that has been modified, the diffuser will request validation
of the modification made.
Select OUI (YES) or NON (NO) using the
WARNING: The validated choice is the definitive one.
Validate NON (NO):
Current modifications are cancelled and the diffuser returns to the previous parameter
setting page.
to enter
Validate OUI (YES):
Current modifications are saved and the diffuser returns to the previous parameter
setting page.
Use the screen browsing function again to move onto the desired page.
n After parameter setting, to return
to the main menu, press
the parameter setting pages.
and buttons, then validate this choice by pressing
n To definitively validate the parameters and restart diffusion, stop the diffuser
to exit by cutting power to it using the I/O button on the back of the diffuser,
then restart it again a few seconds later.
.
19/28