Télécharger Imprimer la page

Vanico Maronyx SOHO Guide D'installation page 13

Publicité

POUR MODÈLE AVEC PHARMACIE - FOR MODEL WITH MEDICINE CABINET
pour modèle sans pharmacie passer à l'étape 15 - For model without medicine cabinet go to step 15
Installer la pharmacie avec robinet mural
14.
Déposer la pharmacie sur le comptoir et de côté afin de faire la connec-
tion des flexibles fournis dans la boîte de robinet. Enlever la grille située
sur le dessus de la pharmacie. Entrez le fil de courant qui alimentera la
barre de lumières DEL située au haut du dos et à gauche. Si l'option
éclairage d'ambiance a été choisie, il y aura un autre fil à enfiler.
Rapprocher la pharmacie près de son emplacement, enfiler les flexibles
dans la fente prévue dans le comptoir, puis, appuyez-là contre le mur et
soulevez-là de quelques pouces. Redescendez la pharmacie en pressant
contre le mur pour bien l'ancrer dans les barres de soutien.
Pour le branchement électrique, utilisez un électricien en règle.
N.B. L'éclairage situé dans la tête de la pharmacie doit être contrôlé par
l'interrupteur de l'entrée. Pour l'option éclairage d'ambiance qui est
activé par un détecteur de mouvement, il faut prévoir un fil à courant
continu.
14. Instal medicine cabinet with wall-mounted faucet
Stand the medicine cabinet sideways on the countertop to connect the flexible hoses
included in the faucet box. Remove the grid located on the top of the cabinet. Enter
the electrical wire to be connected to the LED lights bar located on the top left. If
the optional mood lighting have been chosen there will be another wire to con-
nect.
Bring the cabinet close to its designated position, thread the flexible hoses
into the countertop opening, then, press it against the wall and raise it a few
inches. Lower the cabinet while pressing it against the wall until it hooks onto
the brackets.
Ask an electrician to make the connections.
Note: The electrical 110V outlet for the main LED lighting located in the head
of the medicine cabinet must me connected to the main switch.
For the optional mood lighting - activated by a motion detector - you must
plan another 110V continuous wire.
ROBINETS • FAUCETS
15. Pose des robinets muraux (pour robinets sur tablette voir page 12).
Rentrez le robinet dans l'orifice et vissez la vis de positionnement. Faites
de même pour la mono commande.
15. Instal wall-mounted faucets (for shelf-mounted faucets, see page 12).
Slip the faucet into the opening and screw in the positioning screw. Repeat
for the single control.
13

Publicité

loading