Télécharger Imprimer la page

ECOVACS DEEBOT T50 PRO OMNI Manuel D'instructions page 16

Masquer les pouces Voir aussi pour DEEBOT T50 PRO OMNI:

Publicité

Les langues disponibles

Les langues disponibles

Operate DEEBOT
9
1. Start Mapping
When creating a map for the first time, please follow the robot to help resolve some
minor issues�
For instance, if the robot gets stuck in a narrow space under furniture, you may refer
to the following solutions:
① Raise the furniture to create a passage for the robot if feasible�
② Cover the bottom of the furniture to prevent the robot from trying to enter�
③ Set up Virtual Boundary in the App to prevent the robot from entering�
2. Start Cleaning
• The robot's water tank is automatically refilled through the Station� Manual refilling
is not needed�
• When mopping, the robot will recognize floor types and is able to lift mops
automatically when encountering carpets� Please do not use the robot on shaggy
rugs or carpets with fibres longer than 10 mm� It is recommended to fold up the
shaggy rugs with fibres longer than 10 mm during the cleaning process, or set
the shaggy carpeted area as a No-Entry Zone by setting Virtual Boundary in the
ECOVACS HOME App�
Before cleaning for the first time, please make sure the robot is in the Station and
fully charged� Tap
on the robot to start� You can also use the ECOVACS HOME
App or Voice Control to start�
Note:
• Do not frequently remove washable mopping pads�
• Do not use a rag or any other object to scratch the Moping Pad Plates�
• When the ECOVACS HOME App prompts that the mops need to be replaced,
please replace them in time� Explore more accessories on ECOVACS HOME
App or at https://www�ecovacs�com�
EN
16
3. Pause
Tap
on the robot to pause it while it is working� You can also use the ECOVACS
HOME App or Voice Control to pause the robot�
4. Wake up
After pausing for a while, all indicator lights on the robot will go out� To wake up the
robot, press
5. Return to Station
Use the ECOVACS HOME App or Voice Control to recall the robot, or press and
hold the Button on DEEBOT
for 3 seconds, to allow the robot to dock for
charging�
3 s
6. Deep Sleep Mode
The robot will enter deep sleep mode to protect the battery if it stays outside the
Station for about 5 h� Please switch OFF and ON to wake up the robot�

Publicité

loading