ECOVACS DEEBOT T50 PRO OMNI Manuel D'instructions page 13

Quick Start
2
Before using, please remove all protective materials from the robot and OMNI
Station�
1. Installation of Robot and Station
The sound of Click indicates proper installation�
click
2. Power Cord Connection and Station Placement
Place the Station against a wall on a level, hard ground� Ensure there are no
objects within 0�05 m on either side or 0�8 m in front of it�
Note:
• If there are reflective objects, such as mirrors, or reflective skirting lines near the
Station, cover them from the ground up to the height of 14 cm�
• Do not place the Station under direct sunlight�
• Place the Station in a location with a strong Wi-Fi signal�
Fill Clean Water Tank
3
Take out the Clean Water Tank and fill it up to the max water level� After filling the
tank, lock its cover and put it back to the Station�
click
Note:
• Use a clean, dry cloth to wipe off the water on the surface of the tank before putting it in place�
• Please lock the top covers of both water tanks tightly before use�
• Water marks, if any, in the water tanks are from the function test� Please rest assured to use�
Add Cleaning Solution (sold separately)
4
1� Take off the Dust Collection Cabin cover, pull out the cleaning solution unit, and
place it on a level, hard surface�
Max Water Level
Clean Water Tank
Dirty Water Tank
13 EN