Sartorius Stedim Biotech Flexsafe Pro Mixer Drive Unit Mode D'emploi page 25

Condition
Ambient conditions
Setup surface
Suitability of Palletank for Mixing and
mixing bag
5 Installation
5.1 Scope of Delivery
Item
Flexsafe Pro Mixer Drive Unit
®
Screw to replace the transport lock screw
Country-specific power supply cable (EU)
Country-specific power supply cable (USA)
Potential equalization cable, combined with power supply cable
and additional power supply plug
Operating instructions
Technical documentation
5.2 Unpacking the Device
Procedure
Unpack the device .
t
If the device is stored temporarily: Observe the storage information (see Chapter
t
"15 .2 Ambient Conditions", page 50) .
5.3 Prerequisites for Assembly at Installation Site
Procedure
Make sure that the following conditions are met at the installation site:
t
Features
Suitability tested (see Chapter "15 .2 Ambient Conditions", page 50)
− Stable and level surface
− Sufficient space for the device and for moving the device (see Chapter "15 .1
Dimensions and Weight", page 50 for required dimensions)
− Sufficient load-bearing capacity for the device and the peripheral devices even
when full (device weight see Chapter "15 .1 Dimensions and Weight", page 50;
weight of the peripheral devices see instructions for the peripheral devices, e .g .
Palletank for Mixing)
The suitability of the Palletank for Mixing and mixing bags has been checked
(suitability, see Chapter "6 .1 .2 Connecting the Power Supply Cable", page 27) .
Operating Instructions
Installation
Quantity
1
2
1
1
1
1
1
Flexsafe
® Pro Mixer Drive Unit 25