Technical Data; Setting Up And Assembly; Folding - Thomashilfen châssis A ThevoSeat Manuel De L'utilisateur

Technical data

A chassis*
Seat tilt-in-space
Seat height
Turning range of seat
Safe static stability up to max.
Push bar height
Turning circle
Wheel size (front (swivel wheels) / rear)
Weight (w/o seat unit)
carrying capacity (incl. seat unit)
Overall dimensions A chassis (l x w x h),
in running order
Folded dimensions A chassis (l x w x h)
Overall dimensions (l x w x h), in running order
with seat unit ThevoSeat
Folded dimensions (l x w x h)
with seat unit ThevoTwist
Overall dimensions (l x w x h), in running order
with seat unit EASyS
Folded dimensions (l x w x h)
with seat unit EASyS
Overall dimensions (l x w x h), in running order
with seat unit EASyS Modular
Folded dimensions (l x w x h)
with seat unit EASyS Modular
* The A chassis is also available with fixed front wheels.

Setting up and assembly

Adjustments / adaptations shall be carried out by trained or instructed experts (e.g. medical device consultants of a medical device
dealer) only.
The seat can be removed from the A chassis without any tools. Push the click lever below the seat unit forwards and take the seat
unit off the receiver adapter of the chassis forwards. Proceed in reverse order to insert the seat. (fig. 3)
cAUTION: Always ensure the click lever engages audibly. Then make sure the seat has clicked into place by pulling it
forwards.
Commercially available tools are required for mounting / dismounting the accessories. Separate mounting instructions and user
manuals are enclosed with the accessories. If they should be missing, you can download the instructions in the download area of
our website www.thomashilfen.com.

Folding

Unfolding
Take hold of the rehabilitation strollers' push bar and pull it upwards while supporting its base on the rear axle (pull it until you hear
the push bar locking into place, fig. 1). If necessary, set the seat tilt horizontally (cf. seat tilt-in-space adjustment). Then bring the
backrest to an upright position (release back clamping lever / gas spring release button). The foot rest is to be fixed to the knee joints.
Place the grid joints one upon the other and connect them with the screws (from the inside), washers (from the outside), and wing
nuts (from the outside).
Folding together
Bring the backrest to a lying position, loosen the knee angles, and swivel the foot rest over and down onto the seat unit. Move the
seat tilt-in-space adjustment to a horizontal position (cf. seat tilt-in-space adjustment), then loosen the locking levers on both sides of
the chassis (pull them up) and press the push bar down at the same time to fold it inwards into the frame. (fig. 2)
cAUTION: Hold the chassis tight and do not let it fall. Do not apply the foot brake as the wheels may deform.
Folding instructions: Make sure that the seat is in horizontal position when folding with the seat unit mounted.
Size 1
-10° to +35°
48 cm / 18.9"
180°
10°
92 - 114 cm / 36.2 - 44.9"
83 cm / 32.7"
7,5" / 10"
8,2 kg / 18.1 Ib
45 kg / 99.2 Ib
75 x 60 x 77 cm / 29.5 x 23.6 x 30.3"
83 x 64 x 41 cm / 32.7 x 25.2 x 16.1"
77 x 64 x 96 cm / 30.3 x 25.2 x 37.8"
81 x 64 x 60 cm / 31.9 x 25.2 x 23.6"
87 x 59 x 99 cm / 34.3 x 23.2 x 39"
81 x 59 x 49 cm / 31.9 x 23.2 x 19.3"
83 x 59 x 99 cm / 32.7 x 23.2 x 39"
83 x 59 x 59 cm / 32.7 x 23.2 x 23.2"
Size 2
-10° to +35°
54 cm / 21.3"
180°
10°
92 - 120 cm / 36.2 - 47.2"
99 cm / 39"
7,5" / 10"
9,2 kg / 20.3 Ib
50 kg / 110.2 Ib
81 x 73 x 79 cm / 31.9 x 28.7 x 31.1"
78 x 73 x 44 cm / 30.7 x 28.7 x 17.3"
81 x 73 x 99 cm / 31.9 x 28.7 x 39"
88 x 73 x 64 cm / 34.6 x 28.7 x 25.2"
80 x 73 x 99 cm / 31.5 x 28.7 x 39"
90 x 73 x 47 cm / 35.4 x 28.7 x 18.5"
83 x 64 x 99 cm / 32.7 x 25.2 x 39"
99 x 64 x 75 cm / 39 x 25.2 x 29.5"
13