Purpose And Use; Risks And Contraindications; Technical Specifications; Adjustment Options - Thomashilfen Swifty Reha-Buggy Mode D'emploi

Purpose and use

The Swifty Reha-Buggy is suited for the ergonomic transfer (push brace with adjustable height) of handicapped children, both outside
and inside.

Risks and contraindications

Proper handling may avoid any use-related risks. No contraindications are known.

Technical specifications

Swifty Reha-Buggy
Seat depth (with seat minimizer (accessory))
Seat width (with seat minimizer (accessory))
Back height
min. shoulder height with seat minimizer
Lower leg length (with seat minimizer (accessory))
Hip angle
Foot angle
Seat tilt fix
Footrest size (W x L)
Overall dimensions (W x H x L)
Dimensions when folded (W x H x L)
Push bar height
Wheel size, swivel wheels (front)
Wheel size (rear)
Weight
max. carrying capacity basket (accessory)
max. carrying capacity
Folding
NOTE: Please make sure that the buggy does not hit the floor during the unfolding and folding process to avoid twists and
damages of product components. Make sure that the plastic plug of the folding mechanism is in the right position
(higher end of the plug has to show to the back side of the buggy). (fig. 2)
CAUTION: The rehab stroller must not be folded up while the sun and rain cover is mounted.
Unfolding
Take hold of the buggy by the top side of the push bar and firmly pull it open (the sliders will lock audibly into place). Make sure that
the safety bar is placed over the tube of the rear frame. Tighten the lever on the back of the buggy. Set the height-adjustable push bar
to the desired position using the buttons on the sides. (fig. 1)
Folding up (minimum size)
Release the quick-release mechanism on the back of the buggy. Pull up the sliders on the left and right bars and hold onto the safety
bar mounted on the right. Use your upper body to push the push bar forwards and fold the buggy. (fig. 2)
TIP: To avoid the front wheels coming into contact with the rear axle when folding the buggy, you can give the steering forks
on the front wheels a slight turn.

Adjustment options

Seat depth
Loosen the two star grips beneath the seat and pull out the seat section towards you. The seat upholstery does not need to be removed
to adjust the seat depth. Once you have made the adjustment re-tighten the star grips. (fig. 3)
TIP: To make setting the seat depth easier, grasp the front edge of the seat surface with one hand while pressing your other hand
against the bottom centre of the backrest.
12
22 (17 cm) - 28,5 cm / 8.7 (6.7") - 11.2"
34 cm (23 cm) / 13.4" (9.1")
62 cm / 24.4"
26 cm / 10.2"
16 (12 cm) - 33 cm / 6.3 (4.7") - 13"
90° to 115°
90°
+15°
31 x 18 cm / 12.2 x 7.1"
61 x 102 x 98 cm / 24.0 x 40.2 x 38.6"
61 x 38 x 73 cm / 24.0 x 15.0 x 28.7"
80 - 119 cm / 31.5 - 46.9"
7,5"
10"
12.4 kg / 27.3 lb
3 kg / 6.6 lb
35 kg / 77.2 lb