Front / Rear Facing Function; Parking Brake Function; Front Wheel Swivel Lock; Seat Tilt-In-Space Adjustment - Thomashilfen châssis A ThevoSeat Manuel De L'utilisateur

Front / rear facing function

SAFETY INFORMATION:
Push the click lever under the seat unit forwards and remove the seat unit forwards from the chassis. Turn the seat unit around and
insert it the other way around (snap it in place forwards, fig. 3).

Parking brake function

Remove the cable tie that fixes the brakes.
Braking: Put your foot on the brake bar and press it down
Unbraking: Put your foot under the brake bar and lift it up.
cAUTION: The triggering pressure exceeds the norm to achieve a better braking effect.

Front wheel swivel lock

Swivel lock front wheels: Align the front wheel and fix the locking pin (it locks audibly).
Swivel front wheels: Pull out the locking pin and fix it using a half-turn. (fig. 4)

Seat tilt-in-space adjustment

cAUTION: While adjusting the seat tilt-in-space, always hold the back of the stroller in place in order to avoid sudden changes
in position of the child. We recommend adjusting the tilt without the child sitting in the seat. When adjusting the
seat while the child is seated, the child must be secured by a second person.
There are two possibilities to position the seat tilt-in-space of the A chassis:
1. Press the release clamp beneath the seat unit together and adjust the seat tilt-in-space as required, release the clamp. Check if the
seat is locked. (fig. 5a)
2. For a comfortable adjustment of the seat tilt-in-space while standing, use the adjusting lever at the pushbar. Pull the lever to the
tube and keep in place, adjust the required tilt and release the lever. Check if the seat is locked. (fig. 5b)
cAUTION: Make sure the release lever is kept free at all times during everyday use and cannot be released / tightened
accidentally (by pushing it / by contact with other objects), or else there will be an increased risk for the stroller to
tip over or the child getting injured.

Tip assist

(accessory)
Place your foot on the tip assist, keep hold of the stroller with both hands and tip the stroller. (fig. 6)

Suspension system

Suspension activation
Pull out the locking pin from the spring and fix it using a half-turn. (fig. 7)
Suspension deactivation
Fix the locking pin to the spring (it locks audibly).

Basket

Use snap hooks to attach the basket (with the gap at the back) to the four crescent-shaped rings. (fig. 13) When folding, the basket
can remain mounted (maximum basket load: 5 kg / 11 lb).
14
Be sure to check correct and safe locking of the seat unit after each change is made and before a child
is placed in a rehab stroller.