Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
CO n T R O L PA n e L
3
4
5
On/Off Switch (l)/(O):
1
base. The On/Off Switch is located on the front of the machine. Move the
On/Off Switch to the Off (O) position at night and whenever the machine is
left unattended. If the On/Off switch is moved to the Off position to stop a
program mid-cycle, wait 30 seconds for power to recycle and the timer to
reset before moving the On/Off switch back to the On position.
Start ( ) / Stop ( ) Switch: at the start of the blend, always make sure that
2
the Variable Speed Dial is pointed at the Stop Symbol ( ). Rotate the
Variable Speed Dial to Variable Speed 1 or a Program setting. Press down on
the Start/Stop Switch to initiate the blending process. Press down again to
stop the blending process.
Programs can be interrupted by pushing down the Start/Stop switch at any
time. The program will start at the beginning when the Start/Stop switch is
pressed again.
Variable Speed Dial:
3
The Variable Speed Dial serves two functions: the use of three program
settings or ten Variable Speed settings.
•
To use programs: rotate the Variable Speed Dial to the left to the desired
program.
•
To use Variable Speed:
a.
Rotate the Variable Speed Dial to the right to 1.
b.
Press down on the Start/Stop switch.
c.
Rotate the Variable Speed Dial between 1 and High during the
blending cycle to increase or decrease the speed of the blades.
d.
At the end of the blending cycle, rotate the marker on the Variable
Speed Dial back to the Stop Symbol ( ) at the top of the dial.
2
The On/Off Switch controls the power to the machine
Control Panel continues on page 10
1
9
Publicité
