7.5 REGULATING THE MIDI DYNAMICS VALUE
It is possible to set MIDI dynamic levels (velocity) separately for each manual and for the pedal in a value from 0 to 127 for
MIDI B and for MIDI B.
After accessing the MIDI interface control function (by pressing the MIDI key), press PAGE
obtain the following video page on the display:
Õ
Through the CURSOR
turn the Encoder for selecting the value. The two values located under each manual refer to MIDI A (the one to the left) and
yo MIDI B (the one to the right).
Press EXIT to exit or the PAGE
7.6 MIDI TRASPOSITION OF THE NOTE CODE
The MIDI value of transmitted note can be transposed one or two octaves lower or higher.
×
Through the PAGE
the display will show you transposer setting the cursor on the default value 0, it is possible to
transposer higher oe lower the MIDI value of the transmitted note. The possible values are: +2 (octaves), +1 (octave), 0 (no
transposition), -1 (octave), -2 (octaves).
C
Viscount CANTICUS I - II
#"*
?= ?=
Ö
and
place the flashing cursor in correspondance with the parameter you wish to change and
×
Ø
and
keys to scroll through the other MIDI setting video pages.
,
,
?= ?=
:
56
×
as often as required to
?= ?=