Publicité
Les langues disponibles
Les langues disponibles
SAFETY & OPERATION
SAFE PRACTICES & GENERAL INFORMATION
NOTICE: BEFORE USING THE WOOD CHIPPER
•
Clear area of all people and property that could be damaged.
•
Flying projectiles from operation can cause injury.
•
Wear safety glasses, hearing protection, and gloves.
•
Do not wear loose fitting clothes that could get stuck in the moving parts of the machine.
•
Children should not run this equipment.
•
Stay alert of your surroundings and persons that could appear in the area of operation.
•
Operators must be fully trained before using this machine.
•
User manual is read and understood.
•
Machine is positioned on level ground; all guards are fitted and in good condition.
•
Blade is in good condition and secure.
•
All fasteners are checked for tightness.
•
Only wooden materials, free of nails etc. are to be fed into this machine.
•
Emergency stop wire is correctly connected and the switch is functional.
•
Fire extinguisher is available on site.
NOTICE: WHEN USING THE WOOD CHIPPER
•
Always feed standing from the side of the feed chute.
•
It is better to have a second trained operator within easy reach of the machine.
•
Maintain strict discipline at all times and service the machine at specified periods.
•
Be aware of the expulsion chute direction and if necessary, be aware of the wind direction as
well to prevent debris from being blown or where to could affect bystanders.
•
DO NOT put any part of your body into the in-feed chute while the machine is running.
•
DO NOT operate the machine while under the influence of alcohol or drugs.
•
DO NOT operate inside a building or confined space.
•
DO NOT climb on the machine.
20 | OPC566E man.
Publicité
