DK2 POWER OPC566E Mode D'emploi page 19

SAFETY & OPERATION
WARNING:
Make sure the emergency stop wire is connected properly. If not, this
may result in death or serious injury.
WARNING: EMERGENCY STOP
AVERTISSEMENT : ARRÊT D'URGENCE
(EN) Make sure the emergency stop wire is connected properly. If not,
this may result in death or serious injury.
(FR) Assurez-vous que le fil d'arrêt d'urgence est correctement connecté.
Sinon, cela peut entraîner la mort ou des blessures graves.
EMERGENCY SWITCH
COMMUTATEUR D'ARRÊT
D'URGENCE
EMERGENCY STOP WIRE
CÂBLE D'ARRÊT D'URGENCE
WARNING:
Read this Safety & Operations section before you use the Wood
Chipper. Become familiar with the operation and service recommendations to ensure
the best performance of your machine.
CAUTION:
This machine is designed solely to chip wood and must not be used for
any other purpose. It should only be used by trained operators who are familiar with
the content of this manual. It is potentially hazardous to fit or use any parts other than
DK2 OEM parts. The company disclaims all liability for the consequences of such use,
which in addition voids the machine warranty.
EMERGENCY STOP
v.211123 | 19